http://WWW.KHUSHICONTROLSYSTEM.COM
KHUSHICONTROLSYSTEM 57d667ee9ec66a0ac452935e False 68 37
OK
background image not found
Found results for
'powerful performance'
Sx2000 Smart Series INR   0 INR  0
-NaN%

Sx2000 Smart Series

Sx2000 Smart Series The Sx2000 Smart Series is built to deliver powerful performance. It handles loads up to 75 kW (HD) / 90 kW (ND) – making it perfect for compressors, conveyors, machine tools, elevators, textiles, fans, pumps, plastic extruders, wire drawings, etc. Product Range:- Single-Phase 230V - 0.75 to 3.7kW. Three-Phase 230V - 0.75 to 18.5kW. Three-Phase 415V - 0.75 to 90kW. IP66 Three-Phase 415V - 0.75 to 22kW. Enclosures:- IP20 standard & IP66 Optional.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Programmable Logic Controller INR   0 INR  0
-NaN%

Programmable Logic Controller

With the aid of our vast manufacturing unit, we are engaged in offering a wide range of Programmable Logic Controller. All our products are manufactured and developed following the international quality norms and standard at our vendor-base. To meet the varied requirements of our customers, we also offer our range is various specifications. Attributes: Fast, powerful processors, high speed basic instructions-performance-0.2 sec/STEP Control up to 384 digital I/O points that allows up to 384 points (192 points using terminal blocks) Various I/O types & specialty modules Digital in: 24V dc (16 point. 32 point), 110V ac, 220V ac Digital out: Relay, transistor (16 point, 32 point), SSR, combo I/O Special I/O: A/D (8Ch. 4Ch), D/A (4Ch, 2Ch). RTD (4Ch), TC (4Ch), Pulse (4Ch HSC) SCU (2Ch serial data comm.) and link network Range of I/O base options (up to 12 slot) when configuring a system that enables the user to choose a backplane from 2.3. 5, 6, 8. 10 and 12 slots High capacity programming and memory backup option program memory size is from 9.6k words (LX70-CPU70P1) up to 20k words (for LX70-CPU70P2). Built-in flash EEPROM retains all ladder logic Built-in PID capabilities and supports 8-loop PID controls (Only for LX70-CPU7OPi module) Built-in RTC (Real time clock) that supports programming by time and date. (Only for LX70-CPU70P2 module) Built-in RS 232C and RS 485.2 port (LX70-CPU70P2 module) Two communication channels for simple connectivity to computers, operator interface, modem and other controllers to exchange large volumes of data with high speed Superior diagnostics, self-diagnostics to minimize system errors and to maximize diagnostic efficiency LX soft programming software LX soft programming software let create, modify and monitor CPU, forced I/O, I/O configuration. It is a powerful easy-to-use tool for program upload / download Data memory up to 4K words 28 basic and 147 advanced instructions

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Plastic Injection Moulding Servo Drives INR   0 INR  0
-NaN%

Plastic Injection Moulding Servo Drives

We are offering of Plastic Injection Moulding Machine Servo Drives. As the technology of microprocessor unit becomes more advanced and much further, the development and cost effectivity of permanent magnet manufacturing technology for servo motor and high power and high performance semiconductor power devices is improved continuously. Therefore, AC servo motor and AC servo control system have become the basic techniques for accomplishing automation control technology in current industry field. Delta servo system is an omnibearing integrated servo system which is based on Delta's strength in industrial and electronic technology and developed for different customers' requirements of various application machine tools. All ASDA series servo drives are provided with a superior digital signal processor (DSP) which represents a high-speed performance of the control circuit loop. Besides, the other features of Delta ASDA series, including gain tuning, smooth motor operation and software analysis / monitor function, also provide high-speed and high-precision motion control for a wide range of industrial automation applications. Here we provide Servo System With Servo Drive, Servo Motor, Pump, Bell housing, coupling, cable, chopper & drive display are included in package exclusively for Plastic Injection Moulding Machines.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
HMI INR   0 INR  0
-NaN%

HMI

We are offering HMI (Human Machine Interface). Features: High Image quality Clear Screen Without Grid Built-in memory of 26 MB Supports various Fonts and Graphics Pass Through Communication with barcode reader and serial printer Various Built in Interfaces Multi-language Powerful Recipe Handling Range: 4” and 7” : Serial communication with RS-232 & RS-485 5”, 8”, 10”, 12” and 15” : Serial, Ethernet and field network communication

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Hx 2000 AC Drives INR   0 INR  0
-NaN%

Hx 2000 AC Drives

Hx 2000 AC Drives sets the standard for the drive industry by introducing Innovative Energy Reduction, Environment friendly & HVAC System incorporates the outstanding energy savings benefits of the Hx2000 for Fans & Pump application Range: Three Phase 415V - 5.5kW to 90kW Features: V/F, Slip Compensation Built-in DC Reactor from 37 to 90kW Built-in EMC filter from 5.5 to 30kW as default (C3), optional for 37 to 55kW and 75 to 90kW satisfies EMC class 3 even without a filter Multiple-Motor Control (1 main motor and 5 auxiliary motors) Built-in 2 PID Built-in RTC for Scheduling Built-in Payback Counter Lubrication & Damper Control Dry Pump Detection Pump Clean Flow Compensation Fire Mode Password Protection Built-in Communication - BACnet, RS-485 Modbus-RTU, Metasys N2 Global Specifications Compliant- CE, UL Plenum Rated Interface: 7DI, 5(R) 1(TR) DO, 2AI, 2AO Scheduling (Time Event: Real Time Clock (RTC)): Using RTC, user can program following operating schedules for general or exceptional dates: RTC is used so that selected functions can be operated during set time (Possible to set different functions including Fx, Rx, Multiple Acceleration /Deceleration time, multiple frequency & PID, Pre-heat etc.) Using RTC, user can program following operating schedules for general or exceptional dates: 4 Time Period module (Weekly) 8 Exception Date module (Day) 8 Time Event module 29 Functions available (Fx, Rx, Step Freq., PID, etc.) Summer Time available (Start/End date setting) 3 Type of Date displaying available (EU / USA / ASIA) Multi-Motor Control (MMC): Booster Pump: MMC is used when a single drive is required to control multiple motors in pump systems. It can control 1 main motor through PID and 5 auxiliary motors through Drive & Relays, an Ideal cost effective solution for constant pressure / constant flow pumping application. Dry Pump (Under Load Protection): Prevents pump damage when there is insufficient water in the tank. If Actual load is under the Under Load (UL) Detect curve, Inverter will trigger warning or trip signal to protect the pump. Payback Counter: It displays energy saving information by comparing the average energy efficiency for operation with and without the inverter. The energy saving information is displayed as kWh, saved energy cost and CO2 emission level. Fire Mode: When an emergency such as fire occurs at suction/exhaust fans, without any hardware failure or a critical defect, the drive continuously operates to protect other systems under the set frequency and direction. Flow Compensation: In a system for longer pipes & higher flow rate, causing great pressure drop, this feature helps to compensate for pressure drop by increasing the PID reference. Pump Clean Operation: Scraps, which get built up in impellers of pumps, decrease the efficiency of motor performance. Through consecutive FWD/REV or ACC/DEC operation, the scraps get eliminated. This results in extension of pump lifespan and energy saving.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Sx 2000 AC Drives INR   16000 INR  16000
-0%

Sx 2000 AC Drives

The Sx 2000 AC Drives is built to deliver powerful performance. It handles loads up to 75 kW (HD) / 90 kW (ND) – making it perfect for compressors, conveyors, machine tools, elevators, textiles, fans, pumps, plastic extruders, wire drawings, etc. Range: Single-Phase 230V - 0.75 to 3.7kW Three-Phase 230V - 0.75 to 18.5kW Three-Phase 415V - 0.75 to 90kW IP66 Three-Phase 415V - 0.75 to 22kW Enclosure: IP20 standard & IP66 Optional Features: V/F, Sensorless Vector Control, Slip compensation Starting Torque: 150% at 3 Hz for V/F, 200% at 0.5Hz for Vector Control Conformal Coating complying to IEC 60721-3-3 class 3C2 Built-in RS485 Modbus Peer to Peer Communication to share I/O’s Built-in Brake Control Inbuilt PLC functionality Component Life Monitor Inbuilt PID Multi Keypad No Motor Detection Built-in DC Reactor from 37kW to 90kW Built-in Braking Chopper till 30kW Dual rating operation: Designed to be used for heavy and normal duty applications. Overload capacity: Heavy duty operation: 150% of rated current for 60 sec Normal duty operation: 120% of rated current for 60 sec Safety Disable function (Safety Stop): Sx2000 is compliant to the EU Machinery Directive without the additional of previously required external devices. Through this compliance, Sx2000 reduces the number of peripheral devices needed to satisfy safety regulation. It results in cost, space, and maintenance reduction. Enhanced Brake control: Ideal for Crane & Lifts: Brake release with Delay Brake Close frequency different settings possible for Hoisting & Lowering Motion Brake opening command by Drive under following conditions: Inverter Output Frequency > Brake Release Frequency AND Inverter Output Current > Brake Release Current Multi-Keypad: Optional LCD keypad of Master drive enables to access every drive (Slave) connected via inbuilt RS485 communication so that the users adjust and monitor parameters easily. P2P communication: Peer to peer communication among the drives allows sharing any I/O via inbuilt RS485 communication. It might be useful in case of limited number of I/O points for a certain system User Sequence: Built-in PLC Functionality: User sequence creates a simple sequence from a combination of different function blocks with direct access to Drive parameters. No Software required to create logic The sequence can comprise of a maximum of 18 steps using 28 functions blocks. Function blocks: AND, NOR, ADD, SUB, MIN, MAX, COMPARE, TIMER, XOR, SWITCH, UP/DWN COUNT...etc Component Life Monitoring: Sx2000 monitors both main capacitor’s lifecycle and Fan. When the life span of Fan is near, Sx2000 outputs via Relay or Digital output as a alarm sign. Smart Copier: It allows users to download & upload the parameters from/to Sx2000 without AC input power. Easy download of Customized firmware from copy unit to drive Copy paste of parameters Optional Communication Cards: CANopen Profibus DP Modbus TCP /Ethernet I/P) Flange option: Sx2000 allows its heatsink to be installed outside of panel for better cooling system with this option.

INR 16000 INR 16000

Availability:True

Pay mode:COD only

view details
LX 8 Programmable Logic Controller INR   0 INR  0
-NaN%

LX 8 Programmable Logic Controller

We are offering of LX 8 Programmable Logic Controller. Programmable Logic Controller Feature: Small but Strong ! 2,560 points on Small PLC Feel Powerful Communication ! Support 4 x Comm. Port EtherNet , USB, 2 x RS232/485: Built-in 10/100Mbps EtherNet Port Built-in USB Port Built-in 2 channels high speed serial port Supports variable communication protocols: EtherNet Based Protocol: EtherNet/IP , Modbus/TCP, NX-Protocol/TCP, Xnet/TCP, Bootp/DHCP Server, SNMP Server, HTTP (Web) Server Serial Protocol: Xnet Master/Slave, Modbus/RTU, NX-Protocol, DFI-Full Duplex, ASCII(User Defined Protocol) Large Memory: 987KByte Program Memory 128KByte Data Memory Supports 4G SD Memory Card: Backup to SD Card (Data Log, Program), Recipe Data log, Recipe Expandable IO module like Remote I/O 3 Step Powerful Password LXGPC – Programming Software: Online Editing Support Multi-Languages Support Win XP/Vista/7(32/64bit) Best Solution for Network Based Applications (Semi/FPD, Communication, SCADA, etc.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Fx 2000 AC Drives INR   20000 INR  20000
-0%

Fx 2000 AC Drives

Fx 2000 AC Drives generates powerful performance and meets the precise needs through several features such as superior V/F control, V/F PG, slip compensation and sensor less vector control as well as closed-loop vector control. These do not need any kind of external potentiometer and it is possible to add reference from keypad and external signal. Features: Powerful performance Superior V/F control Fine V/F Slip Specifications: 3-Phase 415V 0.75 to 375kW (HD) Starting Torque: 250% at 0Hz for Closed Loop Built-in RS485 Modbus RTU Communication Applications: Pumps Conveyors Wire Drawing

INR 20000 INR 20000

Availability:True

Pay mode:COD only

view details
1
false